期刊名称:International Journal of Soft Computing & Engineering
电子版ISSN:2231-2307
出版年度:2014
卷号:4
期号:1
页码:101-106
出版社:International Journal of Soft Computing & Engineering
摘要:This paper presents the design to control the speed of permanent magnet brushless DC motor using sensorless method. In conventional operation Hall sensors are used to detect the position of the rotor windings and according to which the six switches of the voltage source inverter are gated. In sensorless method, zero crossing point of back EMF of line voltage differences are measured, which will give the information about the phase which is to be energized. The zero crossing instant of back EMF waveforms is estimated indirectly from the measurement of three terminal voltages of the motor, from which correct commutation instants of the six switches are estimated. A direct phase current control method is used to control the phase currents in four switches. Cost reduction is achieved by elimination of three Hall Effect position sensors and the numbers of power switches are reduced to four instead of six. An algorithm for four switch topology is developed with the third winding connected to the neutral of the supply line and performance of the developed sensorless technique is demonstrated by simulation. The hardware implementation is done by using PIC16F877 and the voltage and virtual hall signals are verified
关键词:brushless DC motor; four switch inverter;sensorless control.