The excessive biological sludge production is one of the disadvantages of aerobic wastewater treatment processes such as sequencing batch reactors. To solve the problem of excess sludge production, oxidizing some of the sludge by chlorine, thus reducing the biomass coefficient as well as the sewage sludge disposal may be a suitable idea. In this study, two sequencing batch reactors, each with 20 L volume and controlled by on-line system were used. After providing the steady state conditions in the reactors, sampling and testing of parameters were done during 8 months. The results showed that during the solid retention time of 10 days the kinetic coefficient of Y and K_d were 0.58 mg biomass/mg COD and 0.058/day, respectively. At the next stage, different concentrations of chlorine were used in the reactors intermittently. Results showed that 15 mg chlorine/gMLSS in the reactor was able to reduce the yield coefficient from 0.58 to 0.3 mg biomass/mg COD. In other words, the biological excess sludge was reduced about 48%. But the soluble chemical oxygen demand increased slightly in the effluent and the removal percentage decreased from 95% in the blank reactor to 55% in the test reactor.