文章基本信息

标题：Electrospun Sodium Alginate/Polyethylene Oxide Fibers and Nanocoated Yarns
本地全文：下载
作者：C. Hu ; R. H. Gong ; F. L. Zhou 等
期刊名称：International Journal of Polymer Science
印刷版ISSN：1687-9422
电子版ISSN：1687-9430
出版年度：2015
卷号：2015
DOI：10.1155/2015/126041
出版社：Hindawi Publishing Corporation
摘要：Sodium alginate (NaAlg), as a natural biopolymer, was electrospun from aqueous solution via blending with a biofriendly synthetic polymer polyethylene oxide. The morphology and chemical properties of resultant alginate-based nanofibers were characterized by using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), powder X-ray diffractometer (PXRD), and differential scanning calorimetry (DSC). At a wide voltage window (i.e., 12–24 kV), smooth and uniform nanofibers were obtained from the 5.0% concentration with the NaAlg/PEO ratio ranging from 1 : 1 to 1 : 3. The results from FTIR, PXRD, and DSC demonstrate that molecular interaction exists between these two polymers and, therefore, contributes to the alteration of crystallinity of electrospun fibers. In addition, NaAlg/PEO nanofiber-coated polylactic acid (PLA) yarns with different twist levels were also fabricated in this work. The results show that the tensile strength of the nanocoated hybrid yarn and the tensile strength of uncoated yarn increase with the twist per centimeter (TPC) up to 0.5 but decrease when TPC is further increased. The tensile properties of hybrid yarn are superior to those of the uncoated yarn.