文章基本信息

标题：Determinação Espectrométrica dos Teores de Sódio, Potássio, Cálcio, Magnésio, Fósforo e Enxofre em Biodiesel de Soja
本地全文：下载
作者：Tassio Lessa do Nascimento ; Maria Aparecida Medeiros Maciel ; Maria Alexsandra Sousa Rios 等
期刊名称：Research, Society and Development
电子版ISSN：2525-3409
出版年度：2022
卷号：11
期号：10
页码：1-7
DOI：10.33448/rsd-v11i10.32495
语种：English
出版社：Grupo de Pesquisa Metodologias em Ensino e Aprendizagem em Ciências
摘要：Biodiesel is considered a renewable fuel produced from vegetable oils or animal fats and is used in vehicles equipped with diesel cycle engines. This fuel was introduced in the Brazilian energy matrix through law 11.097/05, assigning to the National Agency of Petroleum, Natural Gas and Biofuel (ANP) the specifications for biodiesel, aiming to ensure its quality in compliance with technical standards and norms. Based on this fact, this work aimed to evaluate the sodium (Na), potassium (K), calcium (Ca), magnesium (Mg), phosphorus (P), and sulfur (S) contents in a biodiesel sample produced in the laboratory. Initially, the soybean oil was transesterified and then characterized by the parameters specific mass at 20 ºC and kinematic viscosity at 40 ºC. After this step, the determinations of the proposed elements began. For Na and K the atomic absorption technique was used, Mg, Ca, and P were determined by atomic emission with inductively coupled plasma and the S content by ultraviolet fluorescence. The values of 880 kg/m3, and 4.8 mm2/s for specific mass and viscosity, respectively, were the evidence that methyl esters were produced. The sum for sodium and potassium was 1.03 mg/kg, for calcium and magnesium was 0.22 mg/kg, phosphorus content was 5.00 mg/kg and sulfur content was 1.67 mg/kg. All the results indicate that the biodiesel produced is in accordance with ANP resolution No 45/14 for the investigated parameters.
关键词：Biodiesel;Spectrometry;Biodiesel Specification;Metals;Ametals.