摘要:A pile–net enclosure aquaculture facility, deployed in inshore waters, is a sustainable and ecological aquaculture pattern for rearing fish and other aquatic animals of economic value in China. It is essential to study the maximum force on and deformation of the net system of a pile–net enclosure facility to prevent its failure, since successful aquaculture is highly dependent on the longevity of the net system. In this study, a pile-net enclosure aquaculture facility with a gapped pile-net configuration was numerically investigated based on the lumped mass model. A Newton’s second-law-based motion equation was solved using Euler’s method. Finally, MATLAB was used to visualize the results. The results highlight that the force of a net system significantly increases with ocean loads, and the load of the entire net is mainly from the top half of the net. Moreover, the maximum force of the vertical rope occurs at the connection of the top channel steel. The maximum force of the horizontal rope and net twine occur in the rope near the still-water level and at the connection of the top channel steel, respectively. Thus, the net at those positions should be reinforced to prevent its failure.