首页    期刊浏览 2024年12月11日 星期三
登录注册

文章基本信息

  • 标题:Improvement of the coiling stress calculation model for a mandrel-sleeve-coil
  • 本地全文:下载
  • 作者:Yonghui Park ; Kyutae Park ; Changwoo Lee
  • 期刊名称:Advances in Mechanical Engineering
  • 印刷版ISSN:1687-8140
  • 电子版ISSN:1687-8140
  • 出版年度:2022
  • 卷号:14
  • 期号:1
  • 页码:1-9
  • DOI:10.1177/16878140211070450
  • 语种:English
  • 出版社:Sage Publications Ltd.
  • 摘要:The steel rolling process employs a coiling-uncoiling process in which a steel sheet is wound and unwound in a coil shape using a coiler to efficiently produce a long steel sheet with a constant thickness. As front and rear tension is required when the steel sheet enters and exits the rolling mill, the coiler introduces tension in the steel sheet through the control of the rotational speed. As the coil is produced, coiling tension accumulates, and pressure is applied to the inside of the coil. Finite element analysis and stress calculation analysis were derived from previous studies to prevent such pressure increases in the sleeves and coils. However, the radial and circumferential stresses at arbitrary positions inside the coil cannot be accurately determined by considering without the stresses’ difference in the thickness direction based on the assumption that the coil’s thickness is thin. In this study, an analytical model that can accurately calculate the sleeve and coil stress during elastic deformation was established by improving the internal circumferential stress generated when the steel sheet is bent into a coil and the radial stress equation associated with the beam bending theory. In addition, by comparing the finite element analysis model results reflecting the same coiling condition, this model’s validity was verified by confirming the consistency of the results.
  • 关键词:Coiling;stress analysis;coiling pressure;analytical solution;finite element analysis
国家哲学社会科学文献中心版权所有