文章基本信息

标题：Greenhouse Gas Emissions in the Industrial Processes and Product Use Sector of Saudi Arabia—An Emerging Challenge
本地全文：下载
作者：Muhammad Muhitur Rahman ; Mohammad Shahedur Rahman ; Saidur R. Chowdhury 等
期刊名称：Sustainability
印刷版ISSN：2071-1050
出版年度：2022
卷号：14
期号：12
页码：7388
DOI：10.3390/su14127388
语种：English
出版社：MDPI, Open Access Journal
摘要：The Kingdom of Saudi Arabia has been experiencing consistent growth in industrial processes and product use (IPPU). The IPPU’s emission has been following an increasing trend. This study investigated time-series and cross-sectional analyses of the IPPU sector. Petrochemical, iron and steel, and cement production are the leading source categories in the Kingdom. In recent years, aluminum, zinc, and titanium dioxide production industries were established. During the last ten years, a significant growth was observed in steel, ethylene, direct reduce iron (DRI), and cement production. The growth of this sector depends on many factors, including domestic and international demand, socioeconomic conditions, and the availability of feedstock. The emissions from IPPU without considering energy use was 78 million tons of CO2 equivalent (CO2eq) in 2020, and the cement industry was the highest emitter (35.5%), followed by petrochemical (32.3%) and iron and steel industries (16.8%). A scenario-based projection analysis was performed to estimate the range of emissions for the years up to 2050. The results show that the total emissions could reach between 199 and 426 million tons of CO2eq in 2050. The Kingdom has started initiatives that mainly focus on climate change adaptation and economic divergence with mitigation co-benefits. In general, the focus of such initiatives is the energy sector. However, the timely accomplishment of the Saudi Vision 2030 and Saudi Green Initiative will affect mitigation scenarios significantly, including in the IPPU sector. The mitigation opportunities for this sector include (i) energy efficiency, (ii) emissions efficiency, (iii) material efficiency, (iv) the re-use of materials and recycling of products, (v) intensive and longer use of products, and (vi) demand management. The results of this study will support the Kingdom in developing an appropriate climate change mitigation roadmap.