文章基本信息

标题：Performance evaluation of accelerometers ADXL345 and MPU6050 exposed to random vibrational input
本地全文：下载
作者：Joo Victor Oliveira Rodrigues ; Marcos Paulo Gonalves Pedroso ; Flávio Fernandes Barbosa Silva 等
期刊名称：Research, Society and Development
电子版ISSN：2525-3409
出版年度：2021
卷号：10
期号：15
页码：1-16
DOI：10.33448/rsd-v10i15.23082
语种：English
出版社：Grupo de Pesquisa Metodologias em Ensino e Aprendizagem em Ciências
摘要：The use of vibration monitors is a well-established practice in industrial maintenance, usually vibration sensors are positioned at specific points on the monitored machinery and data are continuously collected to feed a machine operating health control system. Nevertheless, the technology for obtaining the signal, its treatment and analysis is generally expensive, and the financial return is not evident, which justifies the development of low-cost alternatives technologies. In this work was performed an analysis of the responses of two Micro-Electro-Mechanical accelerometers, models ADXL345 and MPU6050, exposed to a low intensity random signal and standard operating frequency. The objective of the analysis was to verify the capacity of these devices to be used as mechanical vibration sensors for rotating machines. For this purpose, offset shift analyzes of the sensors due to the Earth's gravitational field were performed, as well as vibrational spectrum and rectification errors analysis under multiple conditions. The data pointed to a greater uniformity of the MPU6050 response, while several behavioral anomalies were seen in the ADXL345, when these sensors are exposed to the same mechanical signal. The qualitative and quantitative behavior of MPU6050 rectification error was consistent with reported in the literature. It was noted that the methodology used can profile the behavior of sensors, however, it is not sufficient to safely justify the inaccuracies, requiring that the tests be performed on a statistically representative number of sensors from different manufacturers and batches.
关键词：MEMS;Accelerometers;Mechanical vibrations;Offset shifts;Rectification errors.