文章基本信息

标题：Reproducibility of linear measurements performed in dental models from 3D printing
本地全文：下载
作者：Fernanda Latorre Melgao Maia ; Ademir Franco ; Daphne Azambuja Hatschbach de Aquino 等
期刊名称：Research, Society and Development
电子版ISSN：2525-3409
出版年度：2021
卷号：10
期号：11
页码：1-9
DOI：10.33448/rsd-v10i11.13370
语种：English
出版社：Grupo de Pesquisa Metodologias em Ensino e Aprendizagem em Ciências
摘要：This study aimed to assess the reproducibility of linear measurements performed in dental models produced via intraoral scanning and three-dimensional (3D) printing using digital light processing (DLP) and fused deposition modeling (FDM). A sample of 22 participants was selected for this study. Intraoral scanning was performed in each participant with TRIOS (3Shape A/S, Copenhagen, Denmark) device. The digital models were 3D printed using DLP and FDM techniques. Using a caliper, intraoral linear measurements were performed in situ (on the surface of participant’s teeth) and on the 3D printed models. The measurements taken intraoral and on the models were compared using the Intraclass Correlation Coefficient (ICC). The correlation between measurements taken in situ and on DLP models was poor (0.05). According to Bland-Altman approach, the size of measurements did not bias the outcomes. The intraoral scanning and 3D printing techniques used in this study enabled the reproducibility of linear measurements, however, discrete distortions that might be clinically significant occurred.
关键词：Dental models;Intraoral scanning;Imaging;Three-dimensional printing.