摘要:Three industrial solid wastes including red mud, carbide slag, and phosphogypsum combined with ordinary Portland cement were used as curing agents to solidify/stabilize loess polluted by a high concentration of copper ions. The unconfined compressive strength, resistivity, permeability coefficient, copper ion leaching concentration, pH value, and other engineering application evaluation indexes were analyzed to preliminarily assess the applicability of the curing agent in the remediation of soil contaminated with a high concentration of copper ions. The mineral phases and functional groups of solidified soil were detected using XRD and FTIR, showing that the strength, electrical resistivity, and pH value of solidified soil decrease following the addition of copper ions. Moreover, the strength and resistivity of solidified soil increase with the curing age, and the pH value decreases with age. For solidified contaminated soil, when the total content of curing agent increases from 10 to 20%, the maximum 28 d strength increases from 1.35 to 5.43 MPa, and in this study, its permeability coefficient, copper ion leaching concentration, and pH value were found to be within the limits set by relevant national standards. In conclusion, red mud-carbide slag-phosphogypsum combined with cement has a good stabilizing effect on sites polluted with a high concentration of copper ions.