文章基本信息

标题：Numerical treatment of melting characteristics of angular oriented flat tube in a double tube latent heat energy storage unit
本地全文：下载
作者：Mohamed A. Alnakeeb ; Mohamed A. Abdel Salam ; Mohamed A. Hassab 等
期刊名称：Case Studies in Thermal Engineering
印刷版ISSN：2214-157X
电子版ISSN：2214-157X
出版年度：2022
卷号：30
页码：101751
语种：English
出版社：Elsevier B.V.
摘要：The latent heat energy utilized phase-change material stores enormous amounts of energy in relatively small spaces. The poor thermal conductivity of the phase change material has a significant drawback. Several techniques have been developed to solve this drawback, a geometrical modification was applied to predict the impact on the charging rate and time of the phase change material. A numerical analysis is presented to optimize the angular orientation of the inner flat tube in a double tube latent heat storage system. ANSYS 17.2 was used to execute a two-dimensional unsteady numerical model. The numerical model was validated via experimental published work. Twenty numerical cases of inner flat-tube aspect ratios of 0.5, 0.6, 0.7, 0.8, and 0.9 with angular orientations of 0°, 30°, 60°, and 90° were analyzed. The findings showed that; as the aspect ratio decreases, the average charging rate improvement is increased. For aspect ratios of 0.9 and 0.5, the improvement in entire charging time for the greatest orientation (θ = 90°) relative to the horizontal flat-tube case (θ = 0°) was 11.19% and 49.46%, respectively. The inner tube with an aspect ratio of 0.5 and angular orientation of 90° had the highest average charging rate.
关键词：PCM Latent heat thermal energy storage Flat tube Angular orientation Aspect ratio