文章基本信息

标题：Defining patterns in the dynamic load and strength of the bearing structure of a covered freight car with a filler in the girder beam
本地全文：下载
作者：Sergii Panchenko ; Oleksij Fomin ; Glib Vatulia 等
期刊名称：Eastern-European Journal of Enterprise Technologies
印刷版ISSN：1729-3774
电子版ISSN：1729-4061
出版年度：2021
卷号：6
期号：7
页码：68-76
DOI：10.15587/1729-4061.2021.243866
语种：English
出版社：PC Technology Center
摘要：This paper reports a study into determining the dynamic load and strength of the bearing structure of a covered freight car under operational modes. A feature of the freight car's bearing structure is that the girder beam has a closed cross-section. To reduce the dynamic load of the frame, the girder beam is filled with a material with viscoelastic properties. Such a solution could contribute to the transformation of the kinetic energy of impact (due to jerk, stretching, compression) into work of viscoelastic friction forces, and, consequently, to reducing the load on the bearing structure.To substantiate the proposed improvement, the dynamic load on the bearing structure of a covered freight car was mathematically modeled. The calculation was performed for the case of joint impacts at shunting. The study was carried out in a flat coordinate system. It was established that the maximum accelerations acting on the bearing structure of a covered freight car were about 37?m/s2. The calculated acceleration value is 3.2?% lower than that obtained for the bearing structure of a covered freight car without filler.The results of calculating the strength of the load-bearing structure of a covered freight car are given. In this case, a finite-element method was applied. The maximum equivalent stresses occur in the zones of interaction between the girder beam and the pivot beams, and amount to 319.5?MPa, which is 8?% lower than permissible. The calculation was also performed regarding other operational modes of loading the freight car's bearing structure.The model of the dynamic load on the bearing structure of a covered freight car was verified according to the F-criterion.The research reported here could contribute to designing innovative rolling stock structures, thereby improving the efficiency of their operation.
关键词：transport mechanics;covered freight car;load-bearing structure;dynamic load;innovative freight car