文章基本信息

标题：Effect of quench and temper on hardness and wear of HRP steel (armor steel candidate)
本地全文：下载
作者：Yurianto Yurianto ; Pratikto Pratikto ; Rudy Soenoko 等
期刊名称：Eastern-European Journal of Enterprise Technologies
印刷版ISSN：1729-3774
电子版ISSN：1729-4061
出版年度：2019
卷号：3
期号：12
页码：55-61
DOI：10.15587/1729-4061.2019.156799
语种：English
出版社：PC Technology Center
摘要：The need for quenched and tempered steel increased, especially for the manufacture of the combat vehicle components. This steel is classified as high-strength and hardness and is bullet-resistant steel (armor steel). Maintaining the stability of steel hardness is very important because the quality standard for armor steel is hardness. High hardness causes brittleness increase, and tempers are needed to reduce it (residual stress is relieved by temper). Austenite temperature and temper affect steel hardness and wear resistance of quenched and tempered steel. To obtain hardness and wear due to the influence of quench and temper on hot rolled plate steel as the armor steel candidate. The material used in this research is hot rolled plate steel made in Indonesia with a carbon content of 0.29 %. The method used is heating the material to 900 °C, 885 °C and 870 °C (held for 45, 30 and 15 minutes) and cooling in water and quenched steel is produced. Quenched steel is heated to 150 °C (held for 45, 30 and 15 minutes) and cooled in atmospheric air. Optimum heat treatment parameters, the Taguchi and ANOVA methods were used. From the parameters and level of heat treatment chosen, the number of specimens needed can be known. The parameter of heat treatment has a strong influence on hardness, and ANOVA can obtain wear. Optimum hardness and wear are 566.48 HVN (±532 BHN) and 2.01×10−9 mm2/kg, respectively. Both are influenced by austenite and temper temperature.
关键词：crack;ductility;hardness;holding;martensite;quench;strength;temper;toughness;wear