文章基本信息

标题：Monitoring of polymer type and plastic additives in coating film of beer cans from 16 countries
本地全文：下载
作者：Nurlatifah ; Haruhiko Nakata
期刊名称：Scientific Reports
电子版ISSN：2045-2322
出版年度：2021
卷号：11
DOI：10.1038/s41598-021-01723-3
语种：English
出版社：Springer Nature
摘要：Plastic debris has gained attention as anthropogenic waste in the environment, but less concerned given to metal waste despite its high abundance in aquatic environment. Metal packaging, such as can, utilizes polymeric coating films as barrier between metals and products which leads to be potential source of microplastic pollution. In this study, 27 beer cans from 16 countries for both body and lid parts as well as inside and outside layers were investigated. Despite the country’s origin, epoxy resin was the major polymeric coating used in all beer cans for lid (inside and outside) and body (inside). Whereas poly(1,2-butanediol isophthalate) was frequently used for outside layer of can body. DEHP and BHT were detected in almost all samples with the highest concentration of 5300 ng/g and 520 ng/g. Despite its lower detection frequency, DOA was detected as high as 9600 ng/g in Belgian beer can. There was no apparent relationship present between the home countries of beer cans and amount of additives used. Despite of being broken down, additives concentration in one environmental sample was found to be one to two orders of magnitude higher compared to the new can. This result proved that adsorption of chemical additives took place in the environment and degraded metal debris may become source of microplastic with higher risk of additives pollution in the environment.