文章基本信息

标题：Coconut Oil Heat Capacity
本地全文：下载
作者：Bardan Bulaka ; Syarifuddin Syarifuddin ; Eko Harianto 等
期刊名称：Prisma Sains: Jurnal Pengkajian Ilmu dan Pembelajaran Matematika dan IPA IKIP Mataram
印刷版ISSN：2338-4530
电子版ISSN：2540-7899
出版年度：2021
卷号：9
期号：1
页码：101-107
DOI：10.33394/j-ps.v9i1.3947
语种：English
出版社：IKIP Mataram, Fakultas Pendidikan Matematika dan IPA
摘要：Heat is energy transferred between a system and its surroundings due to the temperature difference that exists between them. Phase changes of coconut oil can be seen at temperatures between 20°C–100°C. To calculate the incoming heat using the equation Q = m.c.ΔT. Where Q in the experiment is calculated by the equation Q = V.I.t. So to calculate the specific heat of heat (c) = Q/(m.ΔT). The heat capacity is obtained from the equation C = m.c. The method in this practicum is used heater with AC current. The heater used has a voltage of 220 Volts, with a power of 350 Volts. Because the heating voltage is too large, a variable ac (variac) is used to lower the voltage. The voltage used is 20 volts. The material used is coconut oil which is labeled "Barco". The heater directly interacts with the oil. So that the oil can be directly heated homogeneously. Then it is bounded by adiabatic walls. The temperature in this study was controlled, ranging from 150C-500C. the heat of fusion of coconut oil at 28°C. After that, the liquid phase is above 28 °C to 63 °C. This is in accordance with the oil label which states that the melting temperature (melting) is around 26 °C. This difference is due to a leak or air entering the adiabatic wall.