摘要:The connections of lightning radiation sources along channels are greatly affected by the radiation source density, and the channel length is geometrically scaled when neglecting repeated discharges in the same channel. Based on lightning mapping array (LMA) three‐dimensional radiation source location data of two lightning flashes, this study presents a radiation source connection method considering the source density and repeated discharges in channels that includes two steps: the connection of radiation sources and the connection of segments. After increasing the spatial connection threshold determined by the source density, the stability of the channel scale under different detection capabilities (source densities) is improved compared with that of the traditional fixed spatial threshold method. The channel growth rate of the low‐density case reaches 120.99%, which is close to the real situation, and the connection shape is consistent with the real situation. For repeated discharge paths, by limiting the time interval of the radiation source connection, the optimized threshold obtained in this paper can distinguish between discharges occurring in the same channel at different times. Compared with the geometric scale, the discharge scale is significantly larger (∼2.8 times the geometric scale in one case) and can better characterize both the lightning discharge process and the affected area. These comprehensive results show that the proposed method can reduce the number of incorrect connections, increase the channel length, and obtain a more realistic discharge scale.