文章基本信息

标题：Processing and properties of hollow glass microsphere particulate-filled PA2200 composites produced by selective laser sintering
本地全文：下载
作者：Dong Ye ; Lihua Yu ; Gaoyan Hou 等
期刊名称：E3S Web of Conferences
印刷版ISSN：2267-1242
电子版ISSN：2267-1242
出版年度：2021
卷号：261
页码：1-5
DOI：10.1051/e3sconf/202126102016
语种：English
出版社：EDP Sciences
摘要：Selective laser sintering (SLS) to prepare composites by adding filler into polymer is an effective method to save costs and reinforce the sintered parts. This article investigated the fabrication of PA2200 composites filled with different volume fractions of hollow glass microsphere (HGM) by SLS. HGM was prepared by silane coupling agent surface treatment. The particle size distribution, microstructure, thermal and mechanical properties of PA2200/HGM composites were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and tensile experiment. The results indicated that the density of the composite was significantly reduced compared to the neat PA2200 and the density decreased with the HGMs content increasing. HGM improved the warping deformation in the process of sintering. The tensile modulus increased while tensile strength and elongation at break decreased as a function of HGM volume fraction in a certain range. This work indicated that thermal properties and tensile properties of polyamide-matrix composites can be reinforced by adjusting HGM content, and PA2200/HGM composite powder is a good material for SLS with less density and lower cost.