文章基本信息

标题：Conversion of Low Density Polyethylene (LDPE) and Polypropylene (PP) Waste Plastics into Liquid Fuel Using Thermal Cracking Process
本地全文：下载
作者：Moinuddin Sarker ; Mohammad Mamunor Rashid ; Md. Sadikur Rahman 等
期刊名称：International Journal of Environment and Climate Change
印刷版ISSN：2581-8627
出版年度：2012
卷号：2
期号：1
页码：1-11
DOI：10.9734/BJECC/2012/994
语种：English
出版社：Sciencedomain International
摘要：In every sector of the world today energy is essential. Energy has many forms such as electricity, transportation fuel and so on. A large amount of energy is produced from crude oil, which is used to produce petroleum and petroleum to produce daily usable plastics. The solution to the above mentioned problems can be solved through the utilization of the new develop technology. This new developed technology will remove these hazardous waste plastics from the environment and convert them into eco friendly liquid fuel. The process is used to convert these waste plastics into liquid fuel creates no harmful emissions and can be produced at a very little overall cost. The thermal process utilized to break down the hydrocarbon chains of the polymers and convert them into liquid fuel. A Steel reactor with temperature range from 100 ºC to 400 ºC is utilized for the plastic thermal degradation process. The process yield about 80-90% liquid product. The experiment is conducted under a fume hood and open air system, no vacuum process is applied in this particular thermal cracking process.
关键词：Renewable energy;thermal cracking;fuel;environment;waste plastic;hydrocarbon;gas