文章基本信息

标题：Real-time Measurements of the Particle Geometric Surface Area by the Weighted-sum Method on a University Campus
本地全文：下载
作者：Leo N.Y. Cao ; David Y.H. Pui
期刊名称：Aerosol and Air Quality Research
印刷版ISSN：1680-8584
出版年度：2020
卷号：20
期号：7
页码：1569-1581
DOI：10.4209/aaqr.2019.12.0621
语种：English
出版社：Chinese Association for Aerosol Research in Taiwan
摘要：This study conducted field measurements of the particle geometric surface area (GSA) and number concentrations on a university campus via two real-time approaches: applying the weighted-sum (WS) method and using a Scanning Mobility Particle Sizer (SMPS). The measurements were conducted on 4 subjects: laser printing, 3D printing, machining (waterjet cutting, sanding, and welding), and environmental aerosols. The highest emissions were found with 3D printing and welding; these concentrations were measured in the printer’s enclosure and when the local exhaust ventilation was on, respectively. In general, the two methods agreed well with each other, with an overall Pearson correlation coefficient of 0.85, although the concentrations constantly fluctuated over a wide range, from 20 to 4 × 104 μm2 cm–3. Since the GSA concentrations reported in this study are the first measurements for some scenarios, our results can serve as a reference for further research as well as for individuals in the vicinity of these emissions.
关键词：Geometric surface area; Real-time; Weighted sum; Occupational exposure; 3D printing emission.