文章基本信息

标题：Automatic compensation of tool disturbances, caused by an unstable cutting process
本地全文：下载
作者：Vladimir Gusev
期刊名称：MATEC Web of Conferences
电子版ISSN：2261-236X
出版年度：2019
卷号：298
页码：1-8
DOI：10.1051/matecconf/201929800017
语种：English
出版社：EDP Sciences
摘要：Modern machining processes are characterized by a separate functioning of the elements of technological system (TS). The cutting mode, that determines the machining efficiency, depends on the functional capability of a low-performance element, and the other higher-performance elements are not able to reduce the workload of the first element. The “strong” element of theTScan not help the “weak” one in reducing the received workload. The transfer of a part of the workload from the “weak” to the “strong” element allows to use the higher cutting mode. In such statement the increase of efficiency of machining processes in the scientific and technical literature was not observed. Is offered to connect a pliable cutting tool with a rigid large-sized workpiece by special contact knot, which allows to compensate the tool perturbations, caused by unstable process of cutting. This knot provides a dissipative and elastic connection between the tool and the workpiece, has been made and tested at holes machining. As a result the increase of efficiency of machining processes of holes was installed.