文章基本信息

标题：Modeling and analysis of debonding in a smart beam in sensing mode, using variational formulation
本地全文：下载
作者：Mohammad Mursaleen Butt ; Sheikh Nazir Ahmad
期刊名称：Journal of King Saud University - Science
印刷版ISSN：1018-3647
出版年度：2020
卷号：32
期号：1
页码：29-43
DOI：10.1016/j.jksus.2017.09.013
语种：English
出版社：Elsevier
摘要：AbstractUsing basic electro-elastic formulation and variational formulation, a higher order finite element model has been developed for the analysis of debonding in a smart cantilever beam. Full length piezo patch embedded at the top and bottom of the aluminium core has been assumed to be de-bonded. The debonding has been incorporated at the interfaces between piezo patches and the core, at the mid span of the beam for one third length of the beam. The effect of debonding in sensing mode has been analysed by presenting the induced potential, axial displacement, axial/transverse electric field and stresses for fully bonded and de-bonded smart cantilever beam. The variation in electric potential, electric field, axial displacement/strain/stress and shear strain/stress observed in case of debonding demonstrates that the mechanics of debonding is complex coupled electro-mechanical behaviour. In the de-bonded beam, the induced potential at the free piezo surface and at the interfaces shows a sinusoidal variation from root to the tip as compared to the linear variation in bonded beam. This is attributed to the non-linear bending moment variation from root to the tip in case of de-bonded beam. The maximum stress in debonding increases nearly 1.5 times to that of bonded beam sensing at various locations.
关键词：Smart beam;PZT-5H;Actuation;Sensing;Bonding;De-bonding