文章基本信息

标题：Effect of Nature and Amount of Polypropylene Composite Filler on the Productivity of Extruder with the Cylinder Equipped with Grooves
本地全文：下载
作者：Volodymyr Krasinskyi ; Volodymyr Moravskyi ; Oleh Suberlyak 等
期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2019
卷号：13
期号：4
页码：264-269
DOI：10.12913/22998624/114960
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：The eﬀect of grooves number in the feed section and screw length as well as fller nature and content on theproductivity of single-screw extruder has been examined. Compositions based on polypropylene with glassfbers, talc and chalk were used for research. It is established that the number of grooves in the feed section andthe length of the screw diﬀerently aﬀect the productivity of a single screw extruder depending on the nature andcontent of the fller. This eﬀect is shown to be most signifcant for polypropylene compositions with mineralpowders (talc and chalk).
关键词：extrusion; polypropylene; fller; extruder; screw; barrel design; active grooved feed section