文章基本信息

标题：Dimensional stability of reinforced bitumen sheets as a possible source of flat roof defects
本地全文：下载
作者：Jan Plachý ; Jana Vysoká ; Radek Vejmelka 等
期刊名称：MATEC Web of Conferences
电子版ISSN：2261-236X
出版年度：2019
卷号：279
DOI：10.1051/matecconf/201927902020
语种：English
出版社：EDP Sciences
摘要：This paper follows up on the results of a research presented at the conference Building Defects 2017. The paper deals with the dimensional stability of bitumen sheets. The manifestation of insufficient dimensional stability is the shrinkage of bitumen sheets in the transverse joints. Shrinkage of bitumen sheets with reinforced polyester liner and a non-reinforced glass fiber is primarily due to insufficient technological discipline. The paper deals with the influence of melting of the sheet on its possible shrinkage during roof exposure. Previous research has shown that the shrinkage happening during melting accounts for more than 50 % of the total shrinkage. The aim of this paper is to show the size of the effect on the biasing of the load-bearing insert during the realization of the waterproofing layer in bitumen sheets with a glass-reinforced polyester carrier liner. The experiment, expressed by the dimensional stability test according to ČSN EN 1107, was performed in a laboratory on three samples of bitumen sheets. Bitumen sheets had different types of reinforcement and a different weight of the carrier liner.