文章基本信息

标题：Analisys of casting defects and mechanical properties on Al-Si alloys using Bangkalan local clays as sand casting binder
本地全文：下载
作者：Candi Galih Syaifullah ; Ayik Bela Saputra ; F Shabrina Ruhyatul 等
期刊名称：MATEC Web of Conferences
电子版ISSN：2261-236X
出版年度：2018
卷号：204
DOI：10.1051/matecconf/201820405014
语种：English
出版社：EDP Sciences
摘要：This research is aimed to know the defect of castings, tensile strength, and hardness of Al-Si alloy to the variation of binder. The research method used is descriptive quantitative research method. This beacuse the data is expressed in the form of numbers. This research uses pre-experimental research design using one-shot case study model. Based on the results of the study, it was found that most pinhole defects were owned by specimens using 90% bentonite binder that is 59 defects. Whereas the pinhole defect which is at least owned by the specimens using banngkalan local clay binder 9% that is 31 defects. The most common open grain structure defect is owned by metal casting specimens using a 9% bentonite binder, which is 81 defects. Whereas the defect of open grain structure is at least owned by the specimen result of casting of metal clad with bangkalan local clay 3% which amounted to 40 defects. The result of the research using bangkalan local clay binder of 9% has higher tensile strength than other binder. This is because the characteristic of bangkalan local clay which has a high content of calcium (Ca) is 92,81%. The value of the tensile strength of the bangkalan local clay is 12,8712 (kg/mm2), whereas the bentonite which is said to be the ideal binder for the mold has a tensile strength of 10,1612 (kg/mm2). The highest hardness value is owned by Al-Si alloy casting specimen with bend mixture variation of bangkalan local clay 9% that is 128,033 HV. While the lowest hardness value is owned by Al-Si alloy casting foundry with 9% bentonite binder 114,4 HV.