文章基本信息

标题：Acceptance and Reverification of CMM in Industrial Conditions
本地全文：下载
作者：Robert Grzegorz Koteras ; Robert Grzegorz Koteras ; Michał Wieczorowski 等
期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2018
卷号：12
期号：1
页码：80-88
DOI：10.12913/22998624/80987
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：Nowadays coordinate measuring machines (CMM) are featured by a great degree of complexity and high accuracy of manufacturing. During use of a machine, usually after periodical maintenance it is highly recommended to perform a verification test according to the same procedures as a standard verification test, including a difference, that performance conformity is checked with user’s declaration. Periodical verification should be performed as often as it comes from a user’s experience and after every interference influencing on mechanical and electronic systems of a CMM, that potentially could cause a change in its accuracy parameters. The best solution is employing for that purpose an independent accredited laboratory, that is featured by high competence and experience. In the paper rules of acceptance and periodical verifications are described, sources of measurement errors resulting from CMM imperfections are presented as well as examples of results for specific measurement devices installed in industry were shown.
关键词：coordinate measuring machine;calibration;reverification;current inspection