文章基本信息

标题：Effect of tension lap splice on the behavior of high strength concrete (HSC) beams
本地全文：下载
作者：Ahmed El-Azab ; Hatem M. Mohamed
期刊名称：HBRC Journal
印刷版ISSN：1687-4048
出版年度：2014
卷号：10
期号：3
页码：287-297
DOI：10.1016/j.hbrcj.2014.01.002
语种：English
出版社：Elsevier
摘要：AbstractIn the recent years, many research efforts have been carried out on the bond strength between normal strength concrete (NSC) and reinforcing bars spliced in tension zones in beams. Many codes gave a minimum splice length for tension and compression reinforcement as a factor of the bar diameter depending on many parameters such as concrete strength, steel yield stress, shape of bar end, shape of bar surface and also bar location. Also, codes gave another restriction about the percentage of total reinforcement to be spliced at the same time. Comparatively limited attention has been directed toward the bond between high strength concrete (HSC) and reinforcing bars spliced in tension zones in beams. HSC has high modulus of elasticity, high density and long-term durability. This research presents an experimental study on the bond between high strength concrete (HSC) and reinforcing bars spliced in tension zones in beams. It reports the influence of several parameters on bond in splices. The parameters covered are casting position, splice length as a factor of bar diameter, bar diameter and reinforcement ratio. The research involved tests on sixteen simply-supported beams of 1800mm span, 200mm width and 400mm thickness made of HSC. In each beam, the total tensile steel bars were spliced in the constant moment zone. Crack pattern, crack propagation, cracking load, failure load and mi span deflection were recorded and analyzed to study the mentioned parameters effect.
关键词：KeywordsBondConcreteLap spliceHigh strengthCasting positionReinforcement ratio