文章基本信息

标题：Coagulation / flocculation process in the removal of trace metals present in industrial wastewater
本地全文：下载
作者：OS Amuda ; IA Amoo ; KO Ipinmoroti 等
期刊名称：Journal of Applied Sciences and Environmental Management
印刷版ISSN：1119-8362
出版年度：2006
卷号：10
期号：3
页码：159-162
DOI：10.4314/jasem.v10i3.17339
语种：English
出版社：Department of Pure & Industrial Chemistry, University of Port Harcourt
摘要：Attempts were made in this study to examine the effectiveness of polymer addition to coagulation process during treatment of a beverage industrial wastewater to remove some of its trace metals content such as lead, cadmium, total iron, total chromium, nickel and zinc. Experiments were conducted using the standard Jar test procedure to determine the performance of both ferric chloride and organic polymer (a non-ionic polyacrylamide) individually and ferric chloride-polymer combination. The dosages used for ferric chloride ranged from 0 to 500mg/l, whereas polymer dosages varied between 0 and 100mg/l. The (optimal) removal efficiency for total chromium in the wastewater was obtained at 300mg /l for ferric chloride and 65mg/l for polymer. Whereas for zinc and total iron, the optimal removal efficiencies were obtained at 500mg/l for ferric chloride and 65mg/l for polymer. Addition of ferric chloride resulted in significant removal of the metals reaching up to 91%, 72% and 54% of total chromium, zinc and total iron respectively while addition of polymer achieved 95%, 87% and 88% of total chromium, zinc and total iron respectively. Ferric chloride produced more voluminous and more compacted sludge than polymer. Combinations of ferric chloride and polymer at different ratio achieved better removal efficiencies of the metals in the range 84-97% for total chromium, 69-90% for zinc and 69-92% for total iron, also less sludge was produced. Lead, cadmium and nickel were not detected in the raw wastewater. Journal of Applied Sciences and Environmental Management Vol. 10(3) 2006: 159-162