摘要:The peak surface brightness values published in Table 3 and Fig. 7 for convolved images were given as twice the true values. A factor of two was missing when converting from convolved units of Jy beam−1 into Jy arcsec−2 . The correct values are given here in Table 1 and Fig. 1. We note that since both measured and simulated values were scaled by the same factor, the ratio of 60% referred to in Sect. 4.3.1 was correct, although the model surface brightness quoted at 150 MHz (after convolving to 0. 007 × 0. 005) should be corrected to 90 mJy arcsec−2 . We emphasize that the error in these peak surface brightness values does not affect the modeling or conclusions in the paper as these were based on integrated flux densities or peak values in units of Jy beam−1 .