文章基本信息

标题：Adsorption of Phosphorus by Modified Clay Mineral Waste Material Relating to Removal of it from Aquatic System
本地全文：下载
作者：S. Y. N. Jiang ; L. C. Su ; H. D. Ruan 等
期刊名称：International Journal of Environmental Monitoring and Analysis
印刷版ISSN：2328-7659
电子版ISSN：2328-7667
出版年度：2014
卷号：2
期号：1
页码：36-44
DOI：10.11648/j.ijema.20140201.14
语种：English
出版社：Science Publishing Group
摘要：This study examined the application of modified clay mineral waste material (MCMWM) for removal of phosphorus (P) from aquatic systems including surface water and wastewater related to the application of recycled solid waste materials. The effects of ionic strength and pH on P adsorption by MCMWM were investigated at pH values of 3, 5, 6, 7 and 9 with P concentrations of 10, 20, 40, 100 and 200 mg/L in solution. The P adsorption was rapidly at the early stage with 95% of P in solution being adsorbed for 10 mg/L P in solution at a high pH range within 0.5 hr. The amount of P adsorbed increased with increasing ionic strength. The amount of P adsorbed increased continuously as pH values increased from 3 to 9 for P adsorption at 10 mg/L. Other series of P concentrations in solution showed variable trends due to the rates of P adsorption being affected by pH associated with the effect of ionic strength. The maximum amounts of P adsorbed and the highest percentages of P adsorbed were obtained at pH 9 for all levels of P concentrations, and at pH 7 for the lower P concentrations in solution. Calcium (Ca) ion was found to form a bridge for P adsorption in solution as the increases in the amount of P adsorbed at high pH values was related to the performance of Ca in favoring P to be adsorbed either onto the surfaces or incorporated into the structural bonds of MCMWM. Ionic strength, pH and modification process have been found to be the important factors that influenced P adsorption in solution.
关键词：Ionic Strength; Modified Clay Mineral Waste Material (MCMWM); pH; Phosphorus Adsorption; Recycling of Solid Waste Material