文章基本信息

标题：STUDY OF COATINGS OBTAINED FROM ALLOY Fe-Mn-C-B-Si-Ni-Cr
本地全文：下载
作者：Mychajło Paszeczko ; Mychajło Paszeczko ; Krzysztof Dziedzic 等
期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2016
卷号：10
期号：31
页码：194-198
DOI：10.12913/22998624/64020
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：Tribological behaviour of coatings obtained from eutectic alloy Fe-Mn-C-B-Si-Ni-Cr was studied. The coatings were obtained by the method of gas metal arc welding (GMA) with use of powder wire. GMA welding method is widely used for the regeneration of machine parts. Eutectic Fe-Mn-C-B-Si-Ni-Cr alloys can be used to obtain high quality coatings resistant to wear and corrosion. Pin-on-disk dry sliding wear tests at sliding speeds 0.4 m/s and under load 10 MPa were conducted for pin specimens. During friction a typical tribological behavior was observed. The mechanism of wear was mechanical-chemical.
关键词：wear;friction;coatings;welding