文章基本信息

标题：FORMABILITY OF THIN SHEETS FROM ALUMINUM ALLOYS
本地全文：下载
作者：Emil Spišák ; Emil Spišák ; Janka Majerníková 等
期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2016
卷号：10
期号：32
页码：248-253
DOI：10.12913/22998624/65759
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：In this contribution there have been evaluated properties of four types of sheets made from aluminium alloys. In the case of each of the examined sheets there has been checked its shearing ability via the influence of punch-die clearance change on the quality of blanking edge. Quality of blanking edge is characterized by a ratio of plastic zone height to the total thickness of the sheared material. Formability during the drawing process was measured with earring test. Results are presented by the earring coefficient (unequal height) of the cups.
关键词：formability;aluminum alloys sheets;uniaxial tensile test;earring test