文章基本信息

标题：DETERMINATION OF RESIDUAL STRESS DISTRIBUTION IN HIGH STRENGTH ALUMINUM ALLOY AFTER EDM
本地全文：下载
作者：Shahid Mehmood ; Shahid Mehmood ; Amir Sultan 等
期刊名称：Advances in Science and Technology Research Journal
印刷版ISSN：2080-4075
电子版ISSN：2299-8624
出版年度：2017
卷号：11
期号：1
页码：29-35
DOI：10.12913/22998624/68729
语种：English
出版社：Society of Polish Mechanical Engineers and Technicians
摘要：Thermal energy produced by discrete and random electric sparks in electric discharge machining (EDM) melts surface material. A portion of this molten material is removed and the remaining material resolidified by rapid cooling in a hydrocarbon oil. The effect of repeated heating and cooling of the surface and sub surface material with complex temperature gradient results residual stresses in machined part. The aim of this investigation is to determine the distribution of residual stresses in the depth of machined material with respect to discharge current, most important electric parameter during EDM. It is well known that surface finish is dependent on discharge current. Therefore, investigations were carried out for smaller discharge current levels i.e. 3, 6, 9, 12 ampere. Hole-drill strain gauge method is used for the determination of residual stresses in the depth of material. For comparison purpose, residual stresses are also determined for conventionally turned specimens. This study provided quantitative analysis of the residual stresses for various discharge current in EDM which is a key parameter in deciding the service life of material.
关键词：aluminum alloy;residual stresses;electric discharge machining;discharge current