文章基本信息

标题：Correlation of Loaded and Unloaded Foot Area With Arch Index in Younger Flatfoot
本地全文：下载
作者：Dwi Basuki Wibowo ; Gunawan Dwi Haryadi ; Achmad Widodo 等
期刊名称：MATEC Web of Conferences
电子版ISSN：2261-236X
出版年度：2017
卷号：135
页码：1-11
DOI：10.1051/matecconf/201713500060
语种：English
出版社：EDP Sciences
摘要：Harris & Beath claimed 23% of human kind population is indicated flatfoot. Identifying flatfoot is by using wet foot test. This footprint is not accurate because of the difficulty to make sure the patient stand upright. Another way is using x-ray to determine height of arch which is a distance from medial longitudinal foot arch to the ground. If the distance is less than certain level, so the foot type is included as flatfoot. Other method proposed by Kulkarni et al. using the footprint index (FPI) which is the ratio of B intercept to A intercept, where the footprint was obtained from pedobarography image. If FPI is lower than 0.63, it is categorized as flatfoot. Another method to determine arch type which is widely used is Cavanagh’s Arch Index (AI) from division of mid foot area to entire footprint area (excluding the toes). If AI>0.26, then the foot type is flatfoot. This study is to learn the correlation between entire loaded and unloaded foot area with Cavanag’s AI. The entire loaded foot and footprint area for evaluating AI derived from a digital footprint modified from document scanner, while the entire unloaded foot area derived from a 3D scanner for foot orthotic. One hundred and two healthy asked voluntarily for doing footprint. From 102 subjects found 63 participants identified as flatfoot, 31 subjects are normal feet and 8 subjects identified as high arch. A series of 3 x 3 repeated measures ANOVAs were used to determine statistical differences (α<0.05). A significant interaction existed between ratio of entire loaded and unloaded foot area (RFA) subject to all categories of AI (p<0.05) also a correlation coefficient of r=0.67 has found between RFA and AI on foot type of flatfoot which means that flatfoot can be indicated by RFA.