文章基本信息

标题：Landslide hazard zonation mapping and cut slope stability analyses along Yercaud ghat road (Kuppanur–Yercaud) section, Tamil Nadu, India
本地全文：下载
作者：V. Ramesh ; V. Ramesh ; S. Mani 等
期刊名称：International Journal of Geo-Engineering
印刷版ISSN：2092-9196
电子版ISSN：2198-2783
出版年度：2017
卷号：8
期号：1
页码：1-22
DOI：10.1186/s40703-017-0039-x
语种：English
出版社：Springer
摘要：Abstract In the present study, the macro landslide hazard zonation (LHZ) mapping and slope stability analyses of selected rock slope (RS) sections were carried out along Kuppanur–Yercaud ghat road section. The macro LHZ map was prepared on 1:50,000 scale using landslide hazard evaluation factor (LHEF) rating scheme proposed by Bureau of Indian Standard IS 14496 (Part-2) 1998. The study incorporated predefined ratings for different causative factors viz. lithology, structure, slope morphometry, relative relief, land use and land cover, and hydrogeological condition as well as triggering factors like seismicity and rainfall. The total estimated hazard (TEHD) was evaluated by adding ratings of all the causative factors. On the basis of TEHD values, the facet 3 with TEHD value 6.25 was classified as high hazard zone (HHZ). The facet 2 and 4 with TEHD values 5.50 and 5.40 respectively was classified as moderate hazard zones (MHZ). The facet 1 and 5 with TEHD values 2.20 and 3.15 was categorized as very low hazard zone (VLHZ). The slope stability analyses were carried out in six RS sections using rock mass rating (RMR) and slope mass rating (SMR) systems and the factor of safety (FOS) was evaluated for critical discontinuity sets. The results of RMR show that RS sections 1, 2, 4, 5, and 6 fall in class-III fair rock category, whereas the RS section 3 falls in class-IV poor rock category. The SMR method involves field measurement of slope and discontinuity orientation. These structural values were plotted in the stereonet and identified possible direction and mode of failure. The results of SMR show that the rock sections 1, 2, 4, 5, and 6 falls under partially stable condition, while the rock section 3 comes under unstable condition. The FOS of the critical discontinuity sections was evaluated for planar as well as wedge failure modes. The results based on planar failure analysis, the RS-2 and RS-3 having FOS < 1 are more unstable for slope failure. The wedge failure analysis shows that all the RS sections having FOS > 1 fall in safe conditions.
关键词：KeywordsEnLandslide hazard zonationSlope stability analysesLHEF rating schemeRock mass rating (RMR)Slope mass rating (SMR)Factor of safety (FOS)