文章基本信息

标题：Determination of the Number of Fixture Locating Points for Sheet Metal By Grey Model
本地全文：下载
作者：Bo Yang ; Bo Yang ; Zhongqi Wang 等
期刊名称：MATEC Web of Conferences
电子版ISSN：2261-236X
出版年度：2017
卷号：95
页码：1-5
DOI：10.1051/matecconf/20179507018
语种：English
出版社：EDP Sciences
摘要：In the process of the traditional fixture design for sheet metal part based on the "N-2-1" locating principle, the number of fixture locating points is determined by trial and error or the experience of the designer. To that end, a new design method based on grey theory is proposed to determine the number of sheet metal fixture locating points in this paper. Firstly, the training sample set is generated by Latin hypercube sampling (LHS) and finite element analysis (FEA). Secondly, the GM(1, 1) grey model is constructed based on the established training sample set to approximate the mapping relationship between the number of fixture locating points and the concerned sheet metal maximum deformation. Thirdly, the final number of fixture locating points for sheet metal can be inversely calculated under the allowable maximum deformation. Finally, a sheet metal case is conducted and the results indicate that the proposed approach is effective and efficient in determining the number of fixture locating points for sheet metal.