文章基本信息

标题：Solution electrospinning of particle-polymer composite fibres
本地全文：下载
作者：Lasse Christiansen ; Lasse Christiansen ; Peter Fojan 等
期刊名称：Manufacturing Review
印刷版ISSN：2265-4224
电子版ISSN：2265-4224
出版年度：2016
卷号：3
DOI：10.1051/mfreview/2016013
语种：English
出版社：EDP Sciences
摘要：Electrospinning is a fast, simple way to produce nano/microfibers, resulting in porous mats with a high surface to volume ratio. Another material with high surface to volume ratio is aerogel. A drawback of aerogels is its inherent mechanical weakness. To counteract this, aerogels can be embedded into scaffolds. The formation of a particle/polymer composite results in improved mechanical stability, without compromising the porosity. In the presented study, aerogel and poly(ethylene oxide) are mixed into a solution, and spun to thin fibres. Thereby a porous membrane, on the micro- and nano-scale, is produced. The maximum polymer-silica weight-ratio yielding stable fibres has also been determined. The morphology of the fibres at different weight ratios has been investigated by optical microscopy and scanning electron microscope (SEM). Low aerogel concentrations yield few particles located in polymer fibres, whereas higher amounts resulted in fibres dominated by the aerogel particle diameters. The diameters of these fibres were in the range between 13 um to 41 um. The flowrate dependence of the fibre diameter was evaluated for polymer solutions with high particle contents. The self-supporting abilities of these fibres are discussed. It is concluded that selfsupporting polymer/aerogel composites can be made by electrospinning.
关键词：Electrospinning;Composite fibres;Poly(ethylene oxide);Aerogel particles