文章基本信息

标题：Fundamental principles of earthquake resistance calculation to be reflected in the next generation regulations
本地全文：下载
作者：Oleg Mkrtychev ; Oleg Mkrtychev ; Guram Dzhinchvelashvili 等
期刊名称：MATEC Web of Conferences
电子版ISSN：2261-236X
出版年度：2016
卷号：86
页码：1-6
DOI：10.1051/matecconf/20168601017
语种：English
出版社：EDP Sciences
摘要：The article scrutinizes the pressing issues of regulation in the domain of seismic construction. The existing code of rules SNIP II-7-81* “Construction in seismic areas” provides that earthquake resistance calculation be performed on two levels of impact: basic safety earthquake (BSE) and maximum considered earthquake (MCE). However, the very nature of such calculation cannot be deemed well-founded and contradicts the fundamental standards of foreign countries. The authors of the article have identified the main problems of the conceptual foundation underlying the current regulation. The first and foremost step intended to overcome the discrepancy in question is renunciation of the K1 damage tolerance factor when calculating the BSE. The second measure to be taken is implementing the response spectrum method of calculation, but the β spectral curve of the dynamic response factor must be replaced by a spectrum of worst-case accelerograms for this particular structure or a spectrum of simulated accelerograms obtained for the specific construction site. Application of the response spectrum method when calculating the MCE impact level makes it possible to proceed into the frequency domain and to eventually obtain spectra of the accelerograms. As a result we get to know the response of the building to some extent, i.e. forces, the required reinforcement, and it can be checked whether the conditions of the ultimate limit state apply. Then, the elements under the most intense load are excluded from the design model the way it is done in case of progressive collapse calculations, because the assumption is that these elements are destroyed locally by seismic load. This procedure is based on the already existing design practices of progressive collapse calculation.