文章基本信息

标题：Influence of Surface-profile and Movement-path of Roller on Thickness Thinning during Multi-pass Deep Drawing Spinning
本地全文：下载
作者：Qinxiang Xia ; Qinxiang Xia ; Junhao Zhang 等
期刊名称：MATEC Web of Conferences
电子版ISSN：2261-236X
出版年度：2016
卷号：80
页码：1-6
DOI：10.1051/matecconf/20168014005
语种：English
出版社：EDP Sciences
摘要：Over thinning is a serious defect influencing the forming quality of spun workpiece during multi-pass deep drawing spinning. Surface-profile and movement-path of roller are the key factors influencing the thinning ratio of wall thickness of spun workpiece. The influence of surface-profile and movement-path of roller on thickness thinning were studied based on numerical simulation and experimental research, four groups of forming experiments were carried out under the combination of the different surface-profile of roller (R12 and R25-12) and movement-path of roller (spinning from the bottom of the blank and spinning from the middle of the blank). The results show that both the surface-profile and movement-path of roller have great influence on wall thickness thinning during multi-pass deep drawing spinning; and compared with the movement-path of roller, the influence of surface-profile of roller is more significant. The experimental results conform well to the simulation ones. It indicates that the FEA model established is reasonable and reliable.