文章基本信息

标题：Fabrication of square microchannel for experimental investigation of two phase flow using conventional machining process
本地全文：下载
作者：Ashish Mogra ; Ashish Mogra ; Satish Kumar Verma 等
期刊名称：Perspectives in Science
印刷版ISSN：2213-0209
电子版ISSN：2213-0209
出版年度：2016
卷号：8
页码：231-233
DOI：10.1016/j.pisc.2016.04.036
语种：English
出版社：Elsevier
摘要：Summary An attempt has been made to develop the microchannel of hydraulic diameter less than or equal to 0.5mm. These channels are fabricated using conventional milling machining process. In order to study the inlet configuration effect, two types of junctions such as T and Y are developed. These microchannels are developed on acrylic substrates of 300mm long and 30mm wide. The cross section of the channel is selected as non-circular (square). The aim behind to develop small diameter minichannel is for development of experimental set up on two phase flow through microsized channels. The cross section of fabricated microchannel is checked with Scanning Electron Microscope (SEM-S-3400N) and found nearest to desired dimension. The objective of this research is to find out an alternate technique for the fabrication of microchannel instead of complicated and costly techniques.
关键词：Microchannel; Square; Scanning electron microscope; Hydraulic diameter;