摘要:After heat treatment, the aluminium coating, deposited on sintered AISI 316L austenitic stainless steel forms an interdiffusion layer. Aluminium diffuses beyond the layer/steel interface, mostly along the interconnected porosities, penetrating into the sintered steel for about 80 gm, and causing a nitrogen exchange reaction with the Cr2N phase. This leads to the formation of AlN particles. At the beginning these are tiny, then they subsequently coalesce and migrate outwards through the interdiffusion layer. The vapour phase aluminium diffusion is in accordance with thermodynamical data.At the layer/coated sintered steel interface, on the steel side, the cavity surfaces are covered by aluminium and chromium mixed films. In uncoated heat treated sintered steels, the chromium oxide films are present in all the volume. The anodic behaviour of aluminium coated and heat treated (700 -900°C) sintered steels is much better than that of the uncoated steels heat treated at the same temperatures.The improvement can be attributed to the Cr2N and Al reaction which makes passivation easier. With 1000°C heat treatment, a worsening is observed compared to the lower temperatures.