文章基本信息

标题：Correlation between microstructure and mechanical properties of Al-Si diecast engine blocks
本地全文：下载
作者：F. Grosselle ; G. Timelli ; F. Bonollo 等
期刊名称：Metallurgical Science and Tecnology
印刷版ISSN：0393-6074
出版年度：2009
卷号：27
期号：2
语种：English
出版社：Metallurgical Science and Tecnology
摘要：In spite of weight reduction of passenger car, the cylinder block is the heaviest component among many automotive engine parts and plays a key role in fuel efficiency and the drivability of vehicles. In hypoeutectic aluminium alloys, the final mechanical properties are strictly connected to microstructural features such as the distribution, the morphology and dimensions of primary ?-Al phase and eutectic Si particles, as well as, type of iron-bearings and defects. The microstructure, in turn, depends on filling process and solidification dynamic. In this work, a HPDC 4-cylinders-inline cylinder block was exhaustively analysed and mechanical properties were correlated to microstructural features. Mechanical properties are affected by microstructure. The best values of UTS and elongation to fracture are obtained for low secondary dendrite arm spacing (SDAS) values and small and more compact eutectic Si particles. If the combined effect of ?-Al phase and eutectic Si particles is taken into account, a linear correlation between UTS and product of SDAS, equivalent diameter and aspect ratio of Si particles is observed, while the elongation to fracture shows an exponential trend, suggesting an high sensitivity on microstructural variation.